How To Measure Windows For Blinds Inside Mount

Download Article

Download Commodity

Measuring for blinds may be somewhat daunting, but it'southward actually quite straightforward and easy to exercise. This commodity provides simple instructions for measuring both inside and outside windows.

Inside mounted blinds are mounted within the window frame for a neater look. This is the about popular method, if the window depth allows information technology.

1. 

   ane

   Exist sure to measure accurately. If the window is gear up in a deep recess, plumbing equipment the blind inside makes for a neat finish. Merely mistakes in measurements can ruin them altogether.

2. 

   2

   Measure out for width. Measure the width of the recess in three places: at the top, at the centre, and at the bottom. Make sure you lot hold both ends of the tape on the inside edges of the recess. Note the smallest measurement, as information technology will exist the one you use.

   Advertisement

3. 

   iii

   Measure for pinnacle. Mensurate the tiptop of the window recess iii times: at the left, in the center, and at the right. Make sure you hold both ends of the tape on the inside edges of the recess. Notation the longest measurement, equally it will be the one you utilize.

Advertizing

Outside mounted blinds are mounted on the wall outside the window frame. This is non the preferred method, but an insufficient window depth may require this type of mounting.

1. 

   one

   Make up one's mind where the mount will be. It should be placed 1 ¹⁄₂ to 3 inches (iii.eight to seven.half dozen cm) higher up the window.^[1]

2. 

   2

   Measure for height. Mensurate from the proposed location of the mount downward to two–four inches (5.ane–10.2 cm) below the bottom of the window. This actress overlap is to cake out light and ensure privacy.

3. 

   three

   Measure out for width. For the width of any set up of blinds, advisedly measure the width of the window and add together between two and four inches on each side.

Advertising

Add together New Question

• Question

  Can I mountain blinds on the wall higher up the window?

  

  Justin Kirkman

  Community Answer

  Yes, you tin. There should exist a 4x8 header beam that runs above the entire length of the window.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

• Always use a steel tape measure for accuracy.

• Always measure at least twice before recording your final measurement.

• Always clearly indicate which measurement is the width and which is the height. Information technology'south very common for people to swap measurements if you are not conscientious, so always indicate the width measurement first, so the meridian last (W 10 H).

Thanks for submitting a tip for review!

Advertisement

Things Y'all'll Demand

• Stepladder
• Metal measuring tape
• Pencil
• Newspaper

Near This Commodity

Thanks to all authors for creating a page that has been read 94,032 times.

Did this article help you?

Source: https://www.wikihow.com/Measure-for-Blinds

Posted by: jonesmopine.blogspot.com

Share this post